Filter
Top Products
25
This unit has a memory for some of the settings – range, sensitivity, zoom,
and frequency. (We will explain these in a moment.) When you turn off
the power, any changes you make to these settings will be saved. You can
return all of the settings to the factory default values, and reset the trip log
to zero. To reset the unit, turn it on by pressing the
PWR
and
CLEAR
buttons
at the same time.
Lamp/Contrast Menu
Press
PWR
The Lamp/Contrast Menu appears when you first press
the
PWR
button and turn on the power. (You will be able to
see part of the main FishFinder display behind the Lamp/
Contrast menu.)
You can press the
PWR
button a second time to exit from
the Lamp/Contrast menu and go directly to the FishFinder
mode. (If you do not make any changes to the settings
within 7 seconds, the unit automatically exits from the
Lamp/Contrast menu anyway.)
You can also enter the Lamp/Contrast menu from any of
the other displays by pressing the
PWR
button for a
moment.
Turn on lamp The display unit includes a backlight which allows you to
read it at night. If you want to turn on the lamp, use either
the < or > arrows on the Page control pad.
Operating Instructions
Turn lamp
on or off
Adjust
contrast
Fig. 3-2
Lamp/Contrast
Menu