Filter
Top Products
53
If you are using one of the dual frequency choices, some of the fish may
be revealed by one beam, but not the other. If a fish is detected by the
narrow 200 kHz beam, the symbol for that fish will appear solid. Any fish
which are detected by the wider 50 kHz beam will have fish symbols
which are hollow.
If you are done with your setup changes, press the
CLEAR
button to go back
to the normal display.
To select the next menu item, press the
<
arrow on
the control pad.
System Setup Display
You can reach the System Setup display at any time by pressing the
Setup button twice. This means that you can reach this display, make a
change, then return to the normal display quickly. See Fig. 4-8. Figure
4-9 shows the items in this display.
To change one of the items, use the
<
and
<
arrows on the Page control
pad to move up or down in the display. This will highlight an area on the
display where the unit is ready to make a change. (This is like the “cursor”
on a computer.)
Setup Instructions
Fig. 4-8
Reaching the
System Setup
Display