Filter
Top Products
3-13
PCS-1/1P
Ethernet Ethernet
ONU ONU
FTTHFTTH
Internet
Regional IP
network
Teleconference
terminal A
210.10.10.10
Teleconference
terminal A
211.10.10.10
3-7. Connection using PPPoE
Example of system
When a call is initiated from teleconference terminal A to teleconference terminal B.
1. The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode: OFF
Host Name: Blank
IP Address: Blank
Network Mask: Blank
Gateway Address: Blank
DNS Address: Blank
Gatekeeper Mode: OFF
Gatekeeper Address: Blank
User Alias: Blank
User Number: Blank
SNMP Mode: OFF
Trap Destination: Blank
Community: public
Description: Videoconference Device
Location: Blank
Contact: Blank
NAT Mode: OFF
NAT Address: Blank
Packet Resend Request: ON
Adaptive Rate Control: ON
LAN Mode: Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to “4-2. PCS-1/1P and Hub setting”.)
Port Number Used: Default
TCP Port Number: 2253
UDP Port Number: 49152
TOS: OFF
PPPoE: ON
PPPoE User Name: User (account) name acquired from a provider
PPPoE Password: Password acquired from a provider
Fixed IP for PPPoE: On (When fixed IP is acquired)
Fixed IP Address for PPPoE: 211.10.10.10
PPPoE DNS: Obtain automatically (Acquired from a provider. Select “Set” when the
fixed DNS server address is specified. Enter the addresses specified from a
provider in “Primary DNS” and “Secondary DNS”, respectively.)