Filter
Top Products
Radar Operation Manual Page 17
Figure 3.1.2 - Save Tuning
3. Move the ShuttlePoint knob to highlight SAVE TUNING TO C-CARD and press [ENT].
4. The file name is given automatically as TUNING1.
3.1.3 Load Tuning from User C-CARD
Loads the complete settings from the User C-CARD and changes the active menu settings.
To load this information from a User C-CARD:
1. Insert the optional User C-CARD into the Chart Plotter.
2. Press [MENU]. Move the ShuttlePoint knob to highlight
TUNING and press [ENT].
Figure 3.1.3 - Load Tuning
3. Move the ShuttlePoint knob to highlight LOAD TUNING FROM C-CARD and press
[ENT].
3.1.4 Heading Line
This function is used if the Radar Antenna was not installed pointing directly parallel with
the centerline of the vessel. Adjusting the heading line ensures that targets are shown
relative to your ship’s bow.
1. Select Head Up mode:
a. Press [MENU]. Move the ShuttlePoint knob to highlight
FEATURES and press
[ENT].
b. Move the ShuttlePoint knob to highlight
ORIENTATION and press [ENT].
c. Move the ShuttlePoint knob to highlight
HEAD UP and press [ENT].