Filter
Top Products
Radar Operation Manual Page 29
a line from the vessel’s position to the edge of the Radar picture display.
EBL/VRM
N
E
W
S
Figure 4.3.1 - EBL & VRM
Handling of EBL & VRM
Positioning the Cursor on the EBL/VRM activates a pop up message E/V underneath the
cursor. It is possible to allow to Move, Hook and turn it off by using the Soft Keys
(EXCEPT
CP180/CP180I)*.
N
E
W
S
Figure 4.3.1a - EBL & VRM Handling
[MOVE] Moves the EBL/VRM from the ship’s position to any location on the Radar page.
[H
OOK] Hooks the EBL/VRM on the Radar page. When hooked and the ShuttlePoint knob is moved: 1) Up/
Down increases or decrease the VRM Circle; 2) Left/Right moves the RB to the port or starboard
on the Radar display.
[OFF] Disables the EBL/VRM.
NOTE for CP180/CP180i*
Pressing [ENT] opens an Options window with MOVE, HOOK and OFF items, move the
ShuttlePoint knob to highlight what you want and press [ENT] to select.
Up to 2 EBL/VRM’s may be shown on the Radar page.
To turn EBL/VRM On or Off or to select 1 EBL/VRM, 2 EBL/VRM or both (1+2) EBL/VRM,
follow this procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
FEATURES and press [ENT].
2. Move the ShuttlePoint knob to highlight
EBL/VRM and press [ENT].
3. Move the ShuttlePoint knob to highlight the desired choice and press [ENT].