Filter
Top Products
Radar Operation Manual Page 19
Figure 3.1.5 - Antenna Position setting
2. Move the ShuttlePoint knob to highlight ANT PARKING and press [ENT].
3. Use the ShuttlePoint knob to adjust the position (between 0 and 90). The displayed
number represents the change from the default setting. The final setting that parks the
Antenna straight ahead will likely be a few degrees left or right from the default setting.
3.1.6 Sector Transmission Off
(ONLY FOR MDS-9 DOME & MDS-10-4/MDS-10-5 OPEN ARRAY ANTENNAS)
This is used to block transmission and target reflection in some special application for fixed
installation like sea watching. Within this sector, targets can not be detected.
Selecting the Sector Transmission Off from the menu:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
TUNING and press [ENT].
Figure 3.1.6 - SectorTransmissionOff (I)
2. Move the ShuttlePoint knob to highlight SECTOR TX OFF and press [ENT].
Radar antenna
Sector OFF
Figure 3.1.6a - SectorTransmissionOff (II)