Filter
Top Products
Radar Operation Manual Page 21
4. UNDERSTANDING THE RADAR DISPLAY
N
E
W
S
Figure 4 - Example of Radar Display page
4.0 RADAR WINDOW
4.0.0 Cursor
When on the Full Radar page or when the focus is on the Radar window, moving the
ShuttlePoint knob will show the cursor on the screen. It is automatically hidden when the
Cursor is not used for more than 5 seconds. It can temporarily be hidden to check for small
targets under it by pressing [CLR].
When the ShuttlePoint knob is moved a popup window will show the position of the Cursor,
the Distance and Bearing from the cursor to the vessels position.
4.1 BASIC
4.1.0 Range
Are selectable among 1/8, 1/4, 1/2, 3/4, 1, 1 + 1/2, 2, 3, 4, 6, 8, 12, 16, 24, 36 and 48 Nm
(the maximum range depends on the Antenna used).
The range can be changed following this procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
RANGE and press [ENT].
2. Move the ShuttlePoint knob to highlight the desired range value and press [ENT].
Another method is:
1. Press a Soft Key.
2. Press [RANGE]. Move the ShuttlePoint knob to the desired range and press [ENT].