Filter
Top Products
Page 10 Radar Operation Manual
When the Radar is connected, any Soft Key can be assigned any of the Radar pages (the
default Soft Keys configuration can be customized (for details see the next paragraph).
1. Press any of the Soft Keys to show the key descriptions.
WAAS 3D
Figure 2.1 - Example of Radar page selection by Soft Keys
2. Press the selected Soft Key (if it has been customized to see the Radar page you want).
2.1.0 Customizing the Soft Keys
To customize a Soft Key, from Chart page:
1. Press any of the Soft Keys.
2. Press and hold one of the Soft Keys until the menu is shown (see the following picture).
Figure 2.1.0 - Customing Soft Keys
3. Move the ShuttlePoint knob to highlight the desired Radar page and press [ENT].
2.2 SOFT KEY OPERATION IN RADAR PAGE (EXCEPT CP180/CP180i)
When the Radar page is shown [TRANSMIT], [RANGE], [GAIN], [RAIN], [SEA] and [PAGE] are
used to perform specific functions described below.
The TRANSMIT Soft Key
After the completion of the Warm Up sequence (see Par. 3.0), press [TRANSMIT] to turn On
the transmission. The Radar image is displayed on the screen.