Filter
Top Products
Page 43Phantom PS1000
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “RADIO SETUP” menu appears.
2. Press the
[
]
key to select “DSC SETUP” menu,
then press the
[
CALL
(
SET
)
MENU
]
key.
3. Press the
[
]
or
[
]
key to select “POS REQUEST”
menu, then press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “Au” or “oF.”
In “Au” mode, after a DSC Position Request is re-
ceived, the radio will automatically transmit your vessels po-
sition. In “oF” mode, the CMP25 RAM+ Microphone’s dis-
play will show who is requesting the position.
5. Press the
[
CALL
(
SET
)
MENU
]]
key to store the selected setting.
6. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
The PS1000 has the capability to turn off the Position Request ringer.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “RADIO SETUP” menu appears.
2. Press the
[
]
key to select “DSC SETUP” menu,
then press the
[
CALL
(
SET
)
MENU
]
key.
3. Press the
[
]
or
[
]
key to select “DSC BEEP” menu,
then press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “POS REQUEST,”
then press the
[
CALL
(
SET
)
MENU
]
key.
5. Press the
[
]
or
[
]
key to select “oF.”
6. Press the
[
CALL
(
SET
)
MENU
]
key to store the se-
lected setting.
7. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the
[
]
or
[
]
key to select “on” in step “5” above.
11.8.2 Transmitting a Position Request to Another Vessel
1. Press the
[
CALL
(
SET
)
MENU
]
key. The DSC Op-
eration menu will appear.
2. Press the
[
]
or
[
]
key to select “POS REQUEST”
menu, then press the
[
CALL
(
SET
)
MENU
]
key. The
transceiver will beep, and the “Position Request direc-
tory” will appear. (To cancel, press the
[
16/9
]
key)
3. Press the
[
]
or
[
]
key to select the “name” you
want to contact.
4. Press the
[
CALL
(
SET
)
MENU
]
key to transmit the