104 En
Remote control features
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
Remote control code default settings
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.
1 Press one of the input selector buttons (
4
)
on the remote control to select the control
area you want to set up.
2 Press
2
CODE SET using a ballpoint pen or
a similar object.
The
B
TRANSMIT indicator on the remote control
flashes twice, and the selected input selector button
lights up.
3 Press the numeric buttons (0 to 9) (
6
) to
enter the five-digit remote control code for
the component to be used.
The
B
TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
y
Refer to “List of remote control codes” at the end of this
manual.
• If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step
3, the setup process is canceled. If this happens, repeat the
setup procedure.
• If you enter the code number “9980”, the remote control
code previously set for the selected control area is cleared.
Setting remote control codes
Input
source
Component
category
Manufacturer
Default
code
TUNER TUNER Yamaha 82915
XM TUNER Yamaha 82918
SIRIUS TUNER Yamaha 82176
A– – –
V-AUX
OTHER AUDIO
ACCESSORIES
(iPod)
Yamaha 82981
DTV/CBL – – –
CD CD Yamaha 62907
MD/CD-R CD-R Yamaha 71292
DVD DVD Yamaha 42543
DVR DVR Yamaha 52544
VCR – – –
PHONO
–––
Note
Notes
DOCK
CBL
PHONO
TUNER
XM
SIRIUS
CD CD-R
DVD
V-AUX
DVR VCR
DTV
MD
A
STANDBY
POWER
POWER
POWER
AV
TV
TRANSMIT
CODE SET
DVD
Lights up
TRANSMIT
Flashes
TRANSMIT
4321
87
09
65
SUR. DECODE
ENHANCER
PROG
PARAMETER
STRAIGHT
PURE DIRECT
AUDIO SEL
MULTI CH IN
Flashes