Filter
Top Products
41 En
Selecting the SCENE templates
BASIC
OPERATION
English
■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 104).
1 Press the desired
A
SCENE button on the
remote control.
2 Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
*
These buttons control the input source component. See
page 103 for details of the function of each button.
■ Setting the input source of the
customized SCENE template on the
remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
1 Press the desired
A
SCENE button on the
remote control.
2 Press and hold the
A
SCENE button and the
desired input selector button (
4
).
The
B
TRANSMIT indicator flashes twice.
3 Keep holding down the buttons pressed in
step 2 until the
B
TRANSMIT indicator
flashes twice again.
If the setting of the input source is not successful, the
B
TRANSMIT indicator flashes repeatedly. In this case, repeat
the setup procedure.
Using the remote control for the SCENE feature
Before performing the following operations, set the operation
mode selector on the remote control to
F
SOURCE.
Note
REC
SCENE
1234
VOLUME
TV VOL TV CH
AMP
SOURCE
TV
TRANSMITCODE SET
STANDBY
POWER
POWERPOWER
AVTV
DOCK
CBL
PHONO
MUTE
TV MUTE
TV INPUT
4321
8
10
7
09
65
SLEEP
SUR. DECODE
ENHANCER
PROG
ENT
PARAMETER
STRAIGHT
PURE DIRECT
AUDIO SEL
MULTI CH IN
MENUTITLE
SET MENU
SRCH MODE
MEMORY
LEVEL
DISPLAYRETURN
BAND
A-E/CAT.
ENTER
PRESET/CH
TUNER
XM
CD CD-R
DVD
V-AU X
DVR VCR
DTV
MD
A
INFO PRG SELECT
SIRIUS
Set to
SOURCE
SCENE
buttons
*
Note