Filter
Top Products
63 En
XM Satellite Radio tuning
BASIC
OPERATION
English
You can display the XM Satellite Radio information (such
as channel number, channel name, category, artist name,
or song title) for the currently selected channel in the front
panel display or in the OSD.
If a status message or an error message appears in the front panel
display or in the OSD, see the “XM Satellite Radio” section in
“Troubleshooting” on page 113 for appropriate remedies.
■ Displaying the XM Satellite Radio
information in the front panel display
Press
G
INFO (or
0
INFO) repeatedly to toggle
between the following XM Satellite Radio
information display modes.
Back to “CHANNEL INFO”
y
• The front panel display can indicate up to 14 alphanumeric
characters at once. You can set whether to display the XM
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the “FL SCROLL” parameter in “OPTION MENU” (see
page 98).
• If the XM Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be
displayed with a space.
• To hold the current XM Raido information, press
8
ENTER on
the remote control while it is being displayed. The HOLD
indicator flashes in the front panel display while you are
holding the XM information. Press
8
ENTER again to release
the held information.
• When the antenna of the XM Mini-Tuner Dock cannot receive
the signals, “NO SIGNAL” appears in the front panel display.
■ Displaying the XM Satellite Radio
information in the OSD
Press
J
DISPLAY.
The following screen is displayed in the OSD.
[1] Search mode (see page 60)
[2] Channel category
[3] Song title
[4] Antenna reception level
[5] Channel number/name
[6] Artist name
y
• To turn off the OSD, press
J
DISPLAY again.
• XM status messages also appear in the OSD.
• You can select the amount of time the XM Satellite Radio
information is displayed in the OSD by using the “OSD-
SOURCE” parameter in “OPTION MENU” (see page 98).
• To hold the XM Satellite Radio information, press
8
ENTER
on the remote control while it is being displayed in the OSD.
“HOLD” appears in the screen while you are holding the XM
information. Press
8
ENTER again or change the XM Satellite
Radio channel to release the held information.
• The current XM Satellite Radio reception level appears on the
top of the XM Satellite Radio information screen. For the best
reception, adjust the orientation of the antenna of Home Dock
so that “ ” or “ ” is displayed here. “ ” is displayed if
the antenna cannot receive the signals correctly. In this case,
adjust the orientation of the antenna (see page 59).
Before performing the following operations, set the operation
mode selector on the remote control to
F
SOURCE and then
press
4
XM.
Displaying the XM Satellite Radio
information
Note
CHANNEL INFO
e.g.) 043 XMU
Channel number/name
CATEGORY INFO
e.g.) ROCK
Channel category
SONG INFO
e.g.) Coldplay / Sp
Artist name / Song title
ANTENNA INFO
e.g.) 043 ANT:
Channel number/Antenna reception level
DSP PROG. INFO
e.g.) 7ch Enhancer
Sound field program
-
XMInformationANT:
ALLCHSEARCH
043:XMU
:Rock
:Coldplay
:Speedofsound
[1]
[2]
[4]
[5]
[6]
[3]