Filter
Top Products
54 En
FM/AM tuning
y
• When this unit is tuned into a station, the TUNED indicator
lights up.
• Hold down the button to continue searching when this unit is in
the manual tuning mode.
• Press
G
INFO (or
0
INFO) repeatedly to toggle the frequency
information and sound field program information in the front
panel.
• (U.S.A. model only)
If the station that this unit is tuned into is an HD Radio station,
you can toggle the HD Radio information in the front panel
display by pressing
G
INFO (or
0
INFO) repeatedly. See
page 58 for details.
• (U.S.A. model only)
If the station that you tune this unit into is the HD Radio station,
the HD indicator also appears in the front panel display. See
page 57 for details about the HD Radio features.
■ Direct frequency tuning
Use this feature tune into the desired station directly by
entering the frequency.
1 Press
7
BAND on the remote control
repeatedly to select the desired reception
band.
“FM” or “AM” appears in the front panel display.
2 Press
B
SEARCH MODE (or
I
SRCH
MODE) repeatedly to select “AUTO TUNING”
or “MANUAL TUNING”.
y
If a colon (:) appears in the front panel display, manual
tuning is not possible. Press
B
SEARCH MODE (or
I
SRCH MODE) to turn the colon (:) off.
3 Enter the frequency of the desired station by
pressing the numeric buttons (
6
).
Example: To tune into 103.7 MHz
y
If the entered frequency is out of the range of the FM/AM tuning,
“WRONG STATION!” appears in the front panel display and
then this unit automatically tunes into the last selected station.
Use this feature to store up to 40 stations FM/AM stations
(A1 to E8: 8 preset station numbers in each of the 5 preset
station groups). Preset the desired stations to this unit by
using the automatic or manual preset tuning features in
advance (see “Automatic station preset” and “Manual
station preset” on page 55).
1 Press
B
SEARCH MODE (or
I
SRCH
MODE) repeatedly to select “PRESET
TUNING”.
2 Press
E
PRESET/TUNING/CH l / h (or
8
PRESET/CH k / n) to select the desired
preset station number (A1 to E8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
y
You can select the preset station group (A to E) by pressing
D
A/
B/C/D/E (or
8
A-E/CAT. l / h) repeatedly.
• (U.S.A. model only)
When you recall one of the sub-audio program (HD2 to HD8)
of an FM HD Radio station, it takes a few seconds for this unit
to recall the desired program. While this unit recalls the sub-
audio program, this unit outputs the sound of the analog service
of the station.
• (U.S.A. model only)
If the selected sub-audio program is currently not available, this
unit is tuned into the main audio program, and if the main audio
program is also not available, this unit is tuned into the analog
service.
Before performing the following operations, set the operation
mode selector on the remote control to
F
SOURCE and then
press
4
TUNER.
AFM 88.9MHz
No colon (:)
1
0
3
7
Using station preset feature
Before performing the following operations, set the operation
mode selector on the remote control to
F
SOURCE and then
press
4
TUNER.
Note
A1:FM 88.9MHz
Preset group and preset station number