Filter
Top Products
Control function operation
30
EJU31024
Watercraft control functions
EJU41370
Remote control transmitter
(VX Deluxe / VX Cruiser)
The Yamaha Security System and Low RPM
Mode settings can be selected by operating
the remote control transmitter. (See page 31
for Yamaha Security System setting proce-
dures and page 37 for Low RPM Mode activa-
tion procedures.)
Since the watercraft is programmed to recog-
nize the internal code from this transmitter
only, the settings can only be selected with
this transmitter.
If you accidentally lose your remote control
transmitter or if it is not operating properly,
contact a Yamaha dealer.
When operating the watercraft, always keep
the transmitter with you, such as by storing it
in the transmitter holder in the beverage hold-
er, so that it is not lost.
NOTICE
ECJ00752
● The remote control transmitter is not
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If the transmitter is
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
● Keep the remote control transmitter
away from high temperatures and do not
place it in direct sunlight.
● Do not drop the remote control transmit-
ter, subject it to strong shocks, or place
any heavy items on it.
● Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
● Do not attempt to disassemble the re-
mote control transmitter yourself. Other-
wise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer. Refer
to local hazardous waste regulations
when disposing of transmitter batteries.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
1 Remote control transmitter
1 Transmitter holder
1
UF2N10E0.book Page 30 Tuesday, October 6, 2009 5:02 PM