A SERVICE OF

logo

Installing Additional Components
Installing Processors and Memory
Chapter 3
38
Step 7. Loosen the power module mounting screws and disconnect the module from its processor by sliding
it toward the back of the chassis.
Figure 3-16Disconnecting the Power Module
Step 8. Remove the CPU power module from the server chassis.
Step 9. Disconnect the turbo fan power cable.
Step 10. Loosen the four heatsink captive screws using the special processor tool that was shipped with your
processor.
Step 11. Slide the sequencing retainer plate toward the back of the chassis to open the hole in the edge of the
turbo fan heatsink for insertion of the special processor tool into the processor locking mechanism.
cpu1wpm1
Power Module
Mounting
Screws
Power
Module
Cable
Processor
Fan
Turbo Fan
Power
Cable