Troubleshooting
Error Messages and Event Logs
Chapter 4
62
Event Logs
The System Event Log (SEL) and Forward Progress Log (FPL), Live Event Log, and Boot logs are available
via the MP. The SEL records system events that are of major importance to system operations. All entries for
the SEL are forwarded to the FPL. The FPL contains system events, forward progress messages from the
BMC, and status/error messages from system firmware, EFI, and from the operating system. The Live Event
and Boot Logs record operating events as they occur.
You can view these logs using the MP. Only basic information is provided here. For complete information,
refer to the hp Integrity cx2600 Operation and Maintenance Guide. It can be found on the HP Server
Documentation CD-ROM which is provided with your hp Integrity cx2600 Server.
Management Processor (MP) Event Logs
The MP interface provides diagnostic and configuration capabilities. To access your MP interface, perform the
following steps:
NOTE The MP interface must be accessed from a terminal console which is attached to the MP via the
MP LAN or MP remote serial connector. Refer to the hp Integrity cx2600 Operation and
Maintenance Guide for additional information.
Step 1. If necessary, press
Ctrl+B to access the MP interface.
Step 2. Log in with proper username and password.
Step 3. Press
cl to display the console logs. This log displays console history from oldest to newest.
Step 4. Press
sl to display the system logs. The system logs consist of:
•System event
• Forward progress
• Current boot
• Previous boot
• Live events
• Clear SEL/FPL logs
Step 5. Select the desired log for viewing. (For a complete explanation of the management processor and all
commands see the hp Integrity cx2600 Operation and Maintenance Guide.)
59 FRU information version error Replace the FRU which was reported. If the
error message is repeated, contact the HP
Support center for assistance.
Table 4-5 EFI Error and Warning Messages (Continued)
Error
Number
Message Description/Solution
