Control Panel Options 45
E-EQ-RX2RG-B RX2 Reference Guide
Password
Access: Start | Settings | Control Panel | Password Icon
Set user access and power up password properties.
Factory Default Settings
Password Blank
At Power On Disabled
Note: Once a password is assigned, each Control Panel option requires the password be
entered before the Control Panel option can be accessed. If you forget the password, it
cannot be restored without performing a cold boot on the unit (which erases all memory).
Enter the password, then type it again to confirm it and click the OK box to save the changes. The
password is immediately in effect.
Click the Power On checkbox to set whether the user types a password at Power On.
Click the Screen Saver checkbox to set whether the user types a password to clear the screensaver.
If there is no screensaver chosen, this checkbox is ignored.
Note: Screensavers are not installed by LXE.
Figure 3-10 Password Properties
