Control Panel Options 59
E-EQ-RX2RG-B RX2 Reference Guide
System
Access: Start | Settings | Control Panel | System Icon
Review System and Computer data and revision levels. Adjust Storage and Program memory
settings.
Factory Default Settings
General N/A
Memory Middle of Memory Bar
Device Name RX2001 or MX3X001
Device
Description
LXE_RX2 or LXE_MX3X
Copyrights N/A
Note: The default Device Name and Device Description may vary depending on the software
revision loaded on the RX2.
General
Figure 3-21 System / General tab
System: This screen is presented for information only. The System parameters cannot be
changed by the user.
Computer: The processor type is listed. The type cannot be changed by the user. The name of
the installed radio card is listed in the dropdown list. Total computer memory and
the identification of the registered user is listed and cannot be changed by the user.
Memory sizes given do not include memory used up by the operating system. Hence, a system
with 128 MB may only report 99 MB memory, since 29 MB is used up by the Windows CE .NET
operating system. This is actual DRAM memory, and does not include internal flash or the internal
ATA card used for storage.
