A SERVICE OF

logo

Open as PDF
next previous
Control Panel Options 55
E-EQ-RX2RG-B RX2 Reference Guide
Format
Access: Start | Settings | Control Panel | RFID | Format tab
Use this option to select the output format that is sent to the open file from RFID read actions.
Figure 3-17 RFID Properties / Format Tab
The default output format is HEX. When HEX is selected, the Separator text box is grayed out.
When EPC is selected, the user can enter a field separator to use between RFID tag read actions.
There are four EPC encoding schemes available:
• SGTIN-96
• SGTIN-64
• SSCC-64
• SSCC-96
Invalid or non-supported formats are represented in HEX digits that represent the bits of encoded
data read from a tag. Select EPC to decode the HEX digits into EPC tag data standards.
Click the Restore Defaults button to set the parameters to their factory default setting. Click OK to
save changes or X to ignore any changes and return to the Control Panel.