A SERVICE OF

logo

Open as PDF
next previous
52 Control Panel Options
RX2 Reference Guide E-EQ-RX2RG-B
Read
Access: Start | Settings | Control Panel | RFID | Read tab
Figure 3-14 RFID Properties / Read Tab
Only the Beep once on Tag and Buzz during read cycle are applicable to the RX2. However due
to the volume of the internal beeper, these audio signals are of limited use in a noisy environment.
Click the Restore Defaults button to set the parameters to their factory default setting. Click OK to
save changes or X to ignore any changes and return to the Control Panel.
Power
Access: Start | Settings | Control Panel | RFID | Power tab
Note: Power Management set using RFID Configuration governs power management of the
RFID module only.
These options affect the LXE APIs. However, there are LXE APIs that can also be called by the
user application to set the power options.
Figure 3-15 RFID Properties / Power Tab