A SERVICE OF

logo

1.1 General Features
Feature Manual 11
Conditions
An account code can be stored in Memory Dialing (One-touch Dialing, Hot Line, Personal Speed
Dialing, System Speed Dialing, Call Forwarding (FWD) to Outside (CO) Line, etc.). In this case, the
Account Code feature number and specified account code must be entered after the Outside (CO) Line
Access number.
An extension user does not need to enter an account code for incoming outside (CO) line calls.
Even in Forced/Verify-All/Verify-Toll mode, emergency calls can be made without an account code (
1.1.49 Emergency Call).
Programming Manual References
[PT Programming]
[310] Account Code
[601-603] TRS-COS—Day/Night/Lunch
[605] Account Code Mode
[805] SMDR Account Code
[PC Programming]
9.1.6 Account Codes [1-5]
9.1.8 SMDR [1-7]—Selection for Printing—Account Code
9.2.1 Main [2-1]—Account Code Mode
9.5.1 Class of Service (COS) [5-1]—Day, Night, Lunch
Feature Manual References
1.1.49 Emergency Call
1.1.81 Memory Dialing
Mode Description
Option An extension user can (but is not required to) enter a 4-digit account code
during a conversation or within 30 seconds after a conversation ends
when a record is needed.
Forced An extension user must always enter a 4-digit account code within 5
seconds after seizing an outside (CO) line. This method ensures that
extension users will not forget to enter account codes.
Verify-All An extension user must always enter a preprogrammed account code (
[310] Account Code) within 5 seconds after seizing an outside (CO) line.
If the entered code does not match any preprogrammed code, the user
will hear a reorder tone.
Verify-Toll An extension user can enter a preprogrammed account code ( [310]
Account Code) within 5 seconds after seizing an outside (CO) line to
override TRS ( 1.1.118 Toll Restriction (TRS) Override by Account
Code). Classes of service (COSs) 3 through 5 will be changed temporarily
to COS 2. COSs 1 and 2 will not be affected. If the entered account code
is also registered as an extension password, the extension password
feature will be given priority. The COS of the corresponding extension will
be applied.