1.1 General Features
28 Feature Manual
• If a CPC (Calling Party Control) signal is received from an outside (CO) line, the corresponding call
between 2 outside parties will be disconnected.
Programming Manual References
[PT Programming]
[205] CO-to-CO Line Call Duration
[414-416] CO Line Mode—Day/Night/Lunch
[605] Account Code Mode
[607] Call Forwarding to CO Line
[PC Programming]
9.1.7 Timers [1-6]—Call Duration—CO-to-CO Duration Limit
9.2.1 Main [2-1]—Account Code Mode, Call Forward to CO
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.91 Outside-to-Outside (CO-to-CO) Line Call Duration
Operating Manual References
1.3.13 Call Forwarding (FWD)—To Outside (CO) Line
1.1.15 Call Hold
Description
An extension user can put a call on hold. Any extension user can retrieve a held call.
Conditions
• Using the Call Hold feature, a proprietary telephone (PT) user can have one intercom call and multiple
outside (CO) line calls on hold at the same time. To hold multiple intercom calls, the user should use
the Call Park feature (
1.1.19 Call Park). Using the Call Hold feature, a single line telephone (SLT)
user can have either one intercom call or one outside (CO) line call on hold. To hold multiple calls, the
user should use the Call Park feature.
• If an outside party is placed on hold and the call is not retrieved within 30 minutes, the call is
automatically disconnected.
• Music on Hold
Music, if available, is sent to the outside party on hold ( 1.1.85 Music on Hold). An external audio
source or tone can be selected as the Music on Hold through system programming ( [111] Music on
Hold).
• Doorphone calls cannot be put on hold.
• Hold Recall
If a call on hold is not retrieved within a preprogrammed time period ( [200] Hold Recall Time), a ring
tone will be heard at the extension that put the call on hold. If the extension is engaged in a call when
the timer expires, an alarm tone will be heard. If the hold recall time is set to "Disable", no tone will be
heard. Going off-hook after the hold recall time has expired automatically re-establishes the
conversation with the call on hold.
