1.1 General Features
Feature Manual 55
In this example:
If an outside (CO) line call is received on outside (CO) line 1:
a) In day mode: Direct In Line (DIL) distribution is assigned. The call is routed to its DIL destination,
extension 101.
b) In lunch/night mode: DIL distribution is assigned. The call is routed to its DIL destination, extension
102.
Conditions
• To use this feature, "DIL" must be selected as the distribution method for the desired outside (CO) line
port. When "Normal" is selected, an incoming outside (CO) line call is received at the extensions
assigned in [408-410] Flexible Ringing—Day/Night/Lunch.
• This outside (CO) line can be used by multiple extension users to make calls, but can only be used by
a single extension to receive calls.
• If a DIL destination is an extension within an extension group that has enabled the Idle Extension
Hunting feature and it is busy, the Idle Extension Hunting feature becomes active (
1.1.67 Idle
Extension Hunting).
Programming Manual References
[PT Programming]
[408-410] Flexible Ringing—Day/Night/Lunch
[414-416] CO Line Mode—Day/Night/Lunch
[PC Programming]
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.67 Idle Extension Hunting
1.1.114 Time Service
Outside (CO) Line No.
Distribution method and destination*
Day Lunch Night
1 DIL 101 DIL 102 DIL 102
2 DIL 103 DIL 103 DIL 103
(Cont.) : : : : : : :
: : : : : : :
8 Normal – Normal – Normal –
* [414-416] CO Line Mode—Day/Night/Lunch
