1.1 General Features
Feature Manual 85
[DSS Console]
Conditions
• Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.
Feature Manual References
1.1.70 LED Indication
Operating Manual References
1.1.1 Before Operating a Telephone
TRANSFER Used to transfer a call to another party.
Flexible CO Used to access an outside (CO) line (or outside (CO) line group) when making
or receiving a call. The button's preprogrammed Outside (CO) Line Access
method determines which line is selected (Default: Single-CO [S-CO]). Can also
be customized as a feature button.
INTERCOM Used to make or receive intercom calls.
AUTO ANS (Auto
Answer)/MUTE
Used to answer an intercom call automatically in hands-free mode, or to mute
the built-in microphone during a conversation.
VOICE CALL Used to answer an intercom call automatically.
AUTO DIAL/STORE Used for System Speed Dialing/Saved Number Redial, playing back personal/
common BV outgoing messages (OGMs) used by the Built-in Voice Message
(BV) feature, and storing program changes.
CONF (Conference) Used to establish a 3-party conference call.
FWD/DND (Call
Forwarding/Do Not
Disturb)
Used to set the FWD or DND feature for the extension.
PAUSE Used to insert a dialing pause in a stored number.
PF (Programmable
Feature)
Used to access a preprogrammed feature (no default). Mostly used as a One-
touch Dialing button.
Button Usage
Flexible DSS Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customized as different feature buttons.
PF Used to access a preprogrammed feature (no default). Mostly used as a One-
touch Dialing button.
Button Function
