1.1 General Features
Feature Manual 79
Conditions
• This feature functions only if the FLASH/RECALL button is set to "MODE 1: EFA mode" ( 1.1.60
Flash/Recall). It is also possible to perform this feature by entering the EFA feature number when the
current call is placed on consultation hold ( 1.1.36 Consultation Hold).
• Flash/Recall Time
The length of an EFA signal can be selected for each outside (CO) line ( [418] Flash/Recall Time).
Programming Manual References
[PT Programming]
[110] Flash/Recall Key Mode
[418] Flash/Recall Time
[PC Programming]
9.1.11 Detail [1-10]—Proprietary Telephone—Flash/Recall Key Mode
9.3.3 Detail [3-3]—Flash/Recall Time
Feature Manual References
1.1.36 Consultation Hold
1.1.60 Flash/Recall
1.1.65 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Operating Manual References
1.3.45 External Feature Access (EFA)
1.1.57 Feature Numbering
Description
To call another extension user or to access PBX features, access numbers (extension numbers or feature
numbers) are required.
Feature numbers are available while:
1. a dial tone is heard
2. a busy tone or Do Not Disturb (DND) tone is heard
3. dialing or talking
4. on-hook
1. Feature Numbering (available while a dial tone is heard)
Extension numbers and features that are available while a dial tone is heard have fixed numbers shown
in the following table:
The extension number can be assigned for each extension through system programming ( [009]
Extension Number).
