1.1 General Features
134 Feature Manual
9.5.4 Emergency Number & Others [5-4]—Extension Lock Class
Feature Manual References
1.1.18 Call Log, Incoming
1.1.49 Emergency Call
1.1.55 Extension Lock
1.1.61 Flexible Buttons
1.1.117 Toll Restriction (TRS)
Operating Manual References
2.1.6 Remote Extension Lock
2.1.7 System Feature Assignment—Extension Lock—CANCEL ALL, Extension Password Set
3.1.3 Flexible Button Assignment—Extension Lock button
1.1.108 Ring Tone Pattern Selection
Description
A different ring tone pattern can be assigned to each incoming call type, such as intercom calls ( [115]
Extension Ring Tone Pattern), calls from each doorphone ( [706] Doorphone Ring Tone Pattern), and
calls from each outside (CO) line ( [423] CO Line Ring Tone Pattern).
Available ring tone patterns are as follows:
[Ring Tone Patterns]
Conditions
• The ring tone pattern for incoming calls (intercom calls and outside (CO) line calls) to a single line
telephone (SLT) can be fixed to "Single" or "Double" for each extension through system programming
( [629] SLT Fixed Bell Pattern). The length of the ring tone pattern depends on the preprogrammed
length of the bell-on signal ( [143] SLT Ring Bell-on Time), combined with the ratio between the bell
signals of the SLT ( [142] SLT Ring/Silence Ratio). Depending on the type of SLT being used, the
Single
Double
Triple
S-Double
(Doorphone only)
1 s
