P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
6-2
Fig. 6-d
Fig. 6-e
Fig. 6-f
Fig. 6-c
G. Locate hose 7U133-185 “S” shaped hose. (See
Fig. 6-c.)
H. This hose will need to have a portion of the
long end removed. Cut approximately 2-3/4"
off the long end of the hose and set aside.
I. Attach the short end of the “S” hose to the inlet
of the thermostat housing using one #20 hose
clamp. (See Fig. 6-f.)
J. Attach the 2-3/4" piece of hose (removed from
the long end of the “S” shaped hose,) to the
supplied outlet of the cross-over tube. (See Fig.
6-d.)
K. Install the supplied formed coolant tube to the
2-3/4" long section of hose installed in the last
step. Secure the “S” shaped hose in place with
the #20 clamps provided. (See Fig. 6-e, 6-f.)
SECTION TO
BE TRIMMED
TO THERMOSTAT
HOUSING
4FU014-040
7U133-185
7U133-050
2.75"
6. THERMOSTAT HOUSING RELOCA-
TION
