P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
10-1
Section 10
COOLANT RESERVOIR RE-INSTALLATION (Non-Cooled Kits Only)
A. Reinstall the factory passenger’s side upper
radiator hose removed in a previous step.
B. Reinstall the factory coolant reservoir using
factory hardware to secure.
C. Reattach the large hose at the bottom of the
reservoir to the thermostat housing using the
factory hose clamp.
D. Reconnect the small overflow hose at the top
using the factory clamps.
E. Check all cooling system hose connections to
make sure they are secured with the appropriate
hose clamps.
F. Refill the cooling system using the previously
drained coolant.
10. COOLANT RESERVOIR RE-INSTAL-
LATION (Non-cooled Kits Only)
