P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
12-2
I. Attach the 1" bypass outlet hose to the 90° plas-
tic fitting and secure the hose with a # 16 hose
clamp.
J. Attach the 3/8" hose previously connected to
the passenger’s side valve cover, to the
1/4"NPT x 3/8" hose x 90° fitting installed in a
previous step.
*** NOTE ***
Trim hoses for best fit.
K. Install the duct to the inlet of the supercharger
and secure in place with the clamps provided.
L. Locate and install a 4.0" x 2.0" long sleeve to
the inlet of duct 4FU012-010 and 2 # 64
clamps. (See Fig. 12-e.)
Fig. 12-e
Fig. 12-f
Fig. 12-g
12. AIR INLET ASSEMBLY, cont’d
TO MAF
FACING
AIR FILTER
M. Remove the Factory MAF sensor element from
the top portion of the air filter housing.
N. Install the element reusing the factory hardware
to the supplied MAF tube that is provided. (See
Figs. 12-f, 12-g.)
