P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-12
5. Remove the 10mm headed bolt that
secures the back of the ECU and the
power distribution box. (See Fig. 8E-d.)
6. Install the coolant reservoir. Secure the
front of the reservoir with the factory fas-
tener removed previously. (See Fig. 8E-e.)
*** NOTE ***
Leave this bolt loose for final adjustment in a
later step.
Fig. 8E-d
Fig. 8E-e
7. Attach the rear mounting bracket to
the strut tower with the 6mm x 20mm
long screws and washer provided.
(See Fig. 8E-f.)
*** NOTE ***
Reinstall the factory ground wire with one of the
6mm screws and washers.
8. Attach a length of 3/4" hose (approxi-
mately 3') to the 3/4" bung on the
front of the coolant reservoir. Route
the hose to the 3/4" outlet on the ther-
mostat housing secure the hose with
the clamps provided. (See Fig. 8E-g.)
10mm HEADED
BOLT
8E. CHARGE AIR COOLER INSTALLA-
TION, cont’d (H.O. KITS ONLY)
Fig. 8E-f
FACTORY
GROUND STRAP
Fig. 8E-g
3/4" HOSE ATTACHED TO
THERMOSTAT HOUSING
