A SERVICE OF

logo

Open as PDF
next previous
P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-11
4. Locate and install 1/4"NPT x 3/8" barbed
fitting in the tapped hole just above the
previously installed mounting bracket.
This hole may have to be opened using the
appropriate drill bit. (See Fig. 8E-c.)
Fig. 8E-c
Fig. 8E-b
Fig. 8E-a
E.
ENGINE COOLANT RESERVOIR INSTALLA-
TION
1. Locate assembly 8N155-080.
2. Attach the rear reservoir mounting bracket
4FU010-051 to the reservoir with the 1/4-
20 x 3/4" long bolts and washers provided.
(See Fig. 8E-a.)
8E. CHARGE AIR COOLER INSTALLA-
TION, (H.O. KITS ONLY)
3. Attach bracket 4FU010-061 to the front of
the reservoir with the hardware provided.
(See Fig. 8E-b.)
BRACKET
3/8" BARBED
FITTING