P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-1
*** NOTE ***
For non-cooled kits skip this section and proceed
to Section 9.
A. BUMPER COVER AND SPLASH PAN
1. Raise the vehicle with a floor jack and set
on jack stands.
2. Remove the seven 5.5mm headed screws
retaining the lower splash panel. (See Fig.
8A-a.)
3. Remove the six Phillips-head screws (3
each side) on the lower portions of the
plastic inner fender liners. (See Fig. 8A-b.)
4. Remove the five plastic clips retaining the
front portion of the fender liner. Both sides
need to be removed. (See Fig. 8A-c.)
5. Remove the four 10mm nuts (2 each side)
retaining the bumper cover to the fenders.
(See Fig. 8A-d.)
8. CHARGE AIR COOLER INSTALLA-
TION (H.O. KITS ONLY)
Fig. 8A-a
Fig. 8A-b
Fig. 8A-c
Section 8
CHARGE AIR COOLER INSTALLATION (H.O. Kits Only)
Fig. 8A-d
10mm HEADED
BOLTS
PHILLIPS-
HEAD SCREWS
SPLASH
PANELS
