ES-4024A User’s Guide
210 Chapter 37 Introducing the Commands
no logging
Disables syslog logging.
ping <IP|host-name>
Sends Ping request to an Ethernet
device.
reload
Restarts the system.
show
bandwidth-control
Displays bandwidth control settings.
broadcast-storm-
control
Displays broadcast storm control settings.
classifier
Displays all classifier related information.
[name]
Displays the specified classifier related
information.
cluster
Displays cluster management status.
candidates
Displays cluster candidate information.
member
Displays the MAC address of the cluster
member(s).
member mac <mac-
addr>
Displays the status of the cluster
member(s).
members config
Displays the configuration of the cluster
member(s).
dhcp relay
Displays DHCP relay settings.
server
Displays DHCP server settings.
server <vlan-id>
Displays DHCP server settings in a
specified VLAN.
diffserv
Displays general DiffServ settings.
filter
Displays filter settings.
garp
Displays GARP information.
hardware-monitor <C|F>
Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
interface <port-
number>
Displays current interface status.
interfaces config
<port-list>
Displays current interface configuration.
egress
Displays outgoing port information.
broadcast-
storm-control
Displays broadcast storm control settings.
port-access-
authentication
Displays port authentication settings.
port-security
Displays port MAC address learning
settings.
spanning-tree
Displays STP settings on the port.
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
