ES-4024A User’s Guide
212 Chapter 37 Introducing the Commands
37.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
ospf virtual-
link
Displays OSPF virtual link settings.
vrrp
Displays VRRP settings.
running-config
Displays current operating configuration.
service-control
Displays service control settings.
snmp-server
Displays SNMP settings.
spanning-tree config
Displays Spanning Tree Protocol (STP)
settings.
system-information
Displays general system information.
time
Displays current system time and date.
timesync
Displays time server information.
trunk
Displays link aggregation information.
vlan
Displays the status of all VLANs.
<vlan-id>
Displays the status of the specified VLAN.
vlan1q gvrp
Displays GVRP settings.
port-isolation
Displays port isolation settings.
traceroute <ip|host-name>
[ttl <1-255>] [wait
<1-60>] [queries <1-
10>]
Determines the path a packet takes to a
device.
help
Displays command information.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 84 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
bandwidth-
control
classifier
<classifier-name>
maximal-bandwidth
<kbps>
Enables bandwidth control for a
traffic flow.
inactive
Disables bandwidth control for a
traffic flow.
broadcast-
storm-control
Enables broadcast storm
control on the switch.
