ES-4024A User’s Guide
Chapter 37 Introducing the Commands 221
vrrp network <ip-
address>/<mask-bits>
vr-id <1-7> uplink-
gateway <ip>
Adds aa new VRRP network nd
enters the VRRP configuration
mode.
inactive
Disables the VRRP settings.
interval <1..255>
Sets the time interval (in
seconds) between Hello
message transmissions.
name <name
string>
Sets a descriptive name of the
VRRP setting for identification
purposes.
no inactive
Activates this VRRP.
no preempt
Disables VRRP preemption
mode.
no primary-
virtual-ip
Resets the network to use the
default primary virtual gateway
(interface IP address).
no secondary-
virtual-ip
Sets the network to use the
default secondary virtual
gateway (0.0.0.0).
preempt
Enables preemption mode.
primary-virtual-
ip <ip>
Sets the primary VRRP virtual
gateway IP address.
priority <1 ..
254>
Sets the priority of the switch in
the VRRP network.
secondary-
virtual-ip <ip>
Sets the secondary VRRP
virtual gateway IP address.
service-control ftp <socket-number>
Allows FTP access on the
specified service port.
http <socket-number>
Allows HTTP access on the
specified service port.
igmp
Allows IGMP managament for
Ping, traceroute, etc..
snmp
Allows SNMP management.
telnet <socket-
number>
Allows Telnet access on the
specified service port.
snmp-server [contact <system
contact>] [location
<system location>]
Sets the geographic location
and the name of the person in
charge of this switch.
get-community
<property>
Sets the get community.
set-community
<property>
Sets the set community.
trap-community
<property>
Sets the trap community.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
