ES-4024A User’s Guide
220 Chapter 37 Introducing the Commands
no area <area-id>
stub
Disables stub network settings
in the area.
no area <area-id>
stub no-summary
Sets the area to send LSAs
(Link State Advertisements).
no area <area-id>
virtual-link
<router-id>
authentication-
key
Resets the authentication
settings on this virtual link.
no area <area-id>
virtual-link
<router-id>
message-digest-
key
Resets the authentication
settings on this virtual link.
no area <area-id>
virtual-link
<router-id>
authentication-
same-as-area
Resets the authentication
settings on this virtual area.
no area <area-id>
virtual-link
<router-id>
Deletes the virtual link from the
area.
no network <ip-
addr/bits>
Deletes the OSPF network.
no redistribute
rip
Sets the switch not to learn RIP
routing information.
no redistribute
static
Sets the switch not to learn
static routing information.
redistribute rip
Sets the switch to learn RIP
routing information.
redistribute rip
metric-type <1|2>
metric <0-65535>
Sets the switch to learn RIP
routing information which will
use the specified metric
information.
redistribute
static
Sets the switch to learn static
routing information.
redistribute
static metric-
type <1|2> metric
<0-65535>
Sets the switch to learn static
routing information which will
use the specified metric
information.
rip
Enables and enters the RIP
configuration mode.
exit
Leaves the RIP configuration
mode.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
