ES-4024A User’s Guide
224 Chapter 37 Introducing the Commands
ingress-check
Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
name <port-name-
string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
list>
Disables port-based VLAN
settings.
exit
Exit from the no commands.
flow-control
Disables flow control on the
port(s).
gvrp
Disable GVRP on the port(s).
inactive
Enables the port(s) on the
switch.
ingress-check
Disables ingress checking on
the port(s).
port-access-
authenticator
Disables port authentication on
the port.
port-access-
authenticator
reauthenticate
Disables port reauthenticateion.
port-security
Disables port MAC address
learning settings on the port.
port-security
learn inactive
Enables port MAC address
learning settings on the port.
spanning-tree
Disables STP on the port.
vlan-trunking
Disables VLAN trunking on the
port(s).
port-access-
authentictor
Enables port authentication on
the port.
reauthenticate
Enables requthentication on the
port.
reauth-period <re
auth-period>
Sets the reauthentication period
on the port.
port-security
Enables port MAC address
learning.
learn inactive
Disables port MAC address
learning.
address-limit
<number>
Sets number of MAC addresses
a port can learn.
pvid <1-4094>
The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
Table 85 interface port-channel Commands (continued)
COMMAND DESCRIPTION
