Filter
Top Products
User Manual 76 Y1-03-0203 Rev.L
Parameter description:
Parameter
Description
Angle(A)
Value range: 2° to 178°
Dim(B)
The parameter Dim(B) defines the width of the fairway in percent of
the horizontal line. Please ensure that Dim(C) has to be greater or
equal to Dim(B).
Value range: 10% to 100%
Dim(C)
The parameter Dim(C) defines the width of the fairway in percent of
-
-
to enter here 100%, additionally the parameter Dim(D) has to be set
to a value greater than zero.
Value range: 10% to 100%
Dim(D)
The parameter Dim(D) defines the height of the horizontal guidance
lines in percent of the display resolution (pixel). If you want to
-
horizontal guidance lines f´2) you have to enter the value 0%,
additionally the parameter Dim(C) has to be set to 100% (your
parameters will pass an internal value check while entering).
Value range: 10% to 70%
NOTE: The Fairway View is a “non linear View”.