ACR Electronics Y1-03-0203 Marine RADAR User Manual


 
EC TYPE EXAMINATION CERTIFICATE
No. BSH/461214321220109
Page2o'f
2
Gomponents necessary for operation:
Components
necessary fof
operation
Part No.
Remarks
NAUTICASTTM AIS
2607
Software-Version:
2.0.S1 05
Connection
Box
2640
GPS
Antenna AIS-A W/SM Coax
2639
VH-3200 VHF Stainless Steel Whip
Antenna 91.4cm
(36in)
2628
or equivalent
The intemal
GPS sensor of the
NAUTICASTTM AIS is used as backup sensor
for
position
reporting
Documentation:
User
Manual NAUTICAST Automatic
ldentification
System:
InstallationManual NAUT|CASTAutomaticldentificationSystem:
Trade names:
The equipment
is
also available
under the following trade
names:
Y1-03-0203 Rev. L
(2009-04-01)
Y1-03-0204 Rev. K
(2009-04-01)
Company
ACR
ACR
Product Name
NAUTICASTTM2 AIS
2609
NAUTICASTTM lnland AIS
2662
(in
SOLAS Mode)
ACR Part No.
of AIS transponder
unit:
Limitations on the acceptance
or use of the
product:
Notes:
The manufacturer shall
inform Bundesamt
für
Seeschifffahrt
und Hydrographie,
as the
notified
body, of any modifications
to the type-tested
product(s)
that
may affect compliance
with the
requirements or conditions
laid down
for
use
of the
product(s).
In case the specified
regulations or standards
are amended
during the
validity of this
certificate, the
product(s)
must be
re-certified before being
placed
on
board vessels to
which
such amended regulations or standards
apply.
The
Mark
of Conformity
(wheelmark)
may onty be affixed to the
type approved equipment,
and
a Manufacturer's
Declaration of Conformity
may only be issued,
if
the
product
quality
system
fully complies
with
the
Marine Equipment
Directive and is certified
by a notified body
against
ANNEX B module
D. E.
or
F of the Directive.
Notice on legal
remedies available:
Objection
to this document
may be filed within one
month after notification.
The objection
must
be
filed in
writing
to,
or
put
on record at, Federal
Maritime and Hydrographic
Agency, Bemhard-Nocht-Str.
78, 20359
Hamburg, Germany