Filter
Top Products
User Manual 8 Y1-03-0203 Rev.L
GPS ANTENNA location on ship (is x in above Menu example) is located 200 meters from bow (A)
and 33 Meters from Starboard side (D).
Note: When only using internal GPS antenna it is ok to have default values for external position
since they are not used.
Ref.Points ext (Position of the external GPS antenna)
A = 200m the distance from bow (front) to the antenna.
B= 20m the distance from the antenna to the stern (rear)
C = 10m the distance from the port (left) side to the antenna
D = 33m the distance from the antenna to the starboard (right) side
Enter Ref.Point int (location of the internal GPS antenna) in the same way.
A = 220m the distance from bow (front) to the antenna.
B= 0m the distance from the antenna to the stern (rear)
C = 10m the distance from the port (left) side to the antenna
D = 33m the distance from the antenna to the starboard (right) side
Your reference points must match the entered ship dimensions. Length of ship = 220m and Beam =
43m. For incorrect dimension the AIS shows:
>>> ext/int ship len/beam don't match
After correct settings of the reference points and dimensions you can press M5 - [Save]. to save
your settings:
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
1.4 Entering Voyage Related Data
(Please see
Appendix 7.2 for password information). Enter Password and use the up and down arrows to edit
Voyage Related data then press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Password inquiry Example: The password query field appears. Input password and press M5 [Enter].
N 1
o
20' E 0
o
13' |1> N/A|2>0.00|3>0.10nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM |Select->| | <-Back