Filter
Top Products
User Manual 9 Y1-03-0203 Rev.L
Scroll to the Voyage Setting Fields with up and down arrows and input your vessel data.
Select a default Cargo Type, Draught, POB (Persons on board), Destination, ETA and Navigation
Status Setting using the [Left] & [Right] arrow keys.
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit].
Press [Back] to return to the Main Menu without saving any changes.
Voyage Related Menu Example:
1.5 Service and User Passwords
WARNING: It is very important that the Service password not be lost. Keeping the
password in a second location may be wise. Memorizing the password is best. If you lose this
password, you cannot make any further configuration changes: Access to the AIS is blocked.
Another master key is not available and the unit would have to be returned to the ACR Service
centre. This service is not free of charge.
Once you have entered the system, please change the default password to your own passwords, for
both levels of access. Use different passwords for the different security levels. Your passwords must
meet the following criteria:
Minimum of six (6) characters, maximum of eight (8) characters
Letters must be in UPPER CASE
Acceptable characters are the A-Z alphabet and 0- 9 digits
Password may contain both letters and numbers
The User Password can be reset in the service configuration menu by entering the Service
Configuration menu and creating a new password.
N 1
o
31' E 0
o
24' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
N 1
o
18' E 0
o
12' |1>0.01|2>1.30|3>1.80nm
*********** Voyage Settings ************
Cargo :<N/A or harmless>
Draught :24.8m
PoB :1
Dest. :CASABLANCA
ETA :10/13 12:31
NavStat.:Engaged in fishing
----------------------------------------
| Save | | | Back