Filter
Top Products
2: Installing the ACS
12 AlterPath Console Server User Guide
Although the ACS unit in the figures are shown with a dual power supply (A/C
or -48VDC), some models may have a single power supply. The single power
units will have just one power cable.
(ACS48 supports -48VDC.)
Rack Mounting the ACS
To rack-mount and connect the ACS to your network, perform the following
steps:
1. Install the brackets onto the front corners of the box using a screw driver
and the screws and bolts provided with the mounting kit.
2. Mount the ACS box in a secure position.
Refer to Appendix B: Safety Guidelines section of this manual to ensure
safety.
Important! Install your AlterPath Console Server near the power
managed equipment and in an easily accessible location.
Important! Install the AlterPath Console Server in a location where
there is an adjacent and accessible wall socket outlet.
3. Proceed to the Installation and Configuration section of this chapter.
brackets