Filter
Top Products
4: Configuring the Web Interface
56 AlterPath Console Server User Manual
Applications > Power Management > Software Upgrade
The Software Upgrade form of Power Management allows you to upgrade
the Power Management software for a selected serial port. The first line of the
form shows the latest software version available. The presence of an
Upgrade button indicates that a new software version for that master or slave
port is available.
To upgrade the software for a selected port, perform the following steps:
1. Go to the Cyclades web site and enter the “Download/Drivers” area.
Download the latest AlterPath PM firware to the /tmp folder in the ACS
box. Be sure to name the firmware "pmfirmware" otherwise the ACS
should not detected it. Note that you cannot copy the firmware image to
the ACS unit through the web interface; you must do it via SSH or by
accessing the console port.
2. From the top menu bar, select Applications; from the left menu panel,
select Power Management; from the tabs, select Software Upgrade.
The system brings up the Software Upgrade form:
3. Select the Refresh button to ensure that all software information on the
form is up-to-date.
4. From the Software Version list, select the software you wish to update,
and then select the Update button to the right of the listed version.