Filter
Top Products
18
boundaries of the Oklahoma - East IMS Smart-
Map cartridge. The default for this feature is
on. Press the left arrow key on the “MAP
BOUNDS” label to turn them off.
Earth Map On/Off
You can turn the earth map completely off,
clearing the screen of all ground detail (includ-
ing IMS SmartMap cartridge detail). To do this,
highlight the “EARTH MAP OFF/ON” label and
press the left arrow key.
Icons On/Off
The AccuMap 12 has symbols that you can place at any location. These
symbols can be turned off, if desired. To do so, move the black box to the
“ICONS OFF/ON” label and press the left arrow key. See the “ICONS”
section in this manual for more information on the icon symbols. Note:
This doesn’t erase the icons, it merely “hides” them.
Detail Cartridge
The AccuMap 12 has two cartridge slots in its back. Either one can hold a
IMS SmartMap, Navionics, or C-MAP cartridge. The unit can only show
detail from one type of cartridge at a time. In other words, you can’t show
detail from an IMS SmartMap and a C-MAP cartridge at the same time.
You must select one or the other. The “Detail Cartridge” menu lets you
select the type of cartridge to display. When you install a mapping car-
tridge, and wish to use it, switch the “Detail Cartridge” to the desired se-
lection on this menu. To do this, simply highlight the menu, then press the
left or right arrow keys to select the proper cartridge type.
C-MAP OPTIONS
If you are using this receiver with a C-Map car-
tridge, a new menu appears on the main menu
list. This is the “C-Map Options” menu. High-
light this menu item and press the right arrow
key. The screen at right appears.
These menu items let you turn the depth lines,
restriction areas, coastal features, and marine
navigation aids off or on. Highlight the desired
feature, then press the right or left arrow key to
change them. Press the EXIT key when you’re finished.