Filter
Top Products
28
Using the right and left arrow keys, move the
black box to the first number in the time that
you want to set. (The time is in hours, minutes,
and seconds) Now press the up or down ar-
row keys until the desired number shows. Con-
tinue until the time shown in the display is cor-
rect, then press the ENT key. In this example,
the down timer is set for 10 minutes. The unit
returns to the navigation, mapping, or windows
display.
To start the timer, press the MENU key, then
move the black box to the “Dn Timer STOP/
GO” label. Press the right arrow key to start
the timer. The timer continues counting until
you stop it. If you turn the up timer’s alarm on
(press the right arrow key when the black box
is on the (Up ALM...Off/On label), it will sound
a tone when it reaches the time you entered in
the up timer set menu. Press the EXIT key to
silence the alarm.
You can reset either alarm to the time you origi-
nally set by pressing the MENU key, then mov-
ing the black box to either the “Up Timer Re-
set” or “DN Timer Reset” label, then press the
right arrow key.
REPROGRAM BOXES
The digital boxes on the MAP 3 and NAV 1 screens can be reprogrammed.
The changes you make to the screen will remain in memory, even if all
power is removed from the unit. You can, however, return the boxes to the
factory settings from the “Preset Groups” item in the “System Setup” menu.
To customize a screen, first switch to either MAP 3 or NAV 1, whichever
you want to customize. Next, press the MENU key, then press the up or
down arrow key until the “Reprogram Boxes” menu is highlighted. Press
the right arrow key. The screen shown as number two at the top of the
next page appears.