Filter
Top Products
63
Edit Route screen showing Route 1 with waypoints set to normal
navigation (left). Reverse command has been executed (center) revers-
ing the order of waypoints on the route. Pressing Navigate (right) will
allow you to navigate the route from the end to the beginning.
Trails
Delete a Trail
This is the command used to erase or delete a trail.
Press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail name|ENT|→ to
DELETE TRAIL|ENT|← to YES|ENT.
To Delete all trails at once
1. Press
MENU|MENU|↓ to MY TRAILS|ENT.
2. Press → to
DELETE ALL|ENT|← to YES|ENT.
Edit a Trail Name
To edit a trail name press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail
name|
ENT|ENT. Press ↑ or ↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
ENT
then EXIT repeatedly to return to the previous page.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the map with the cursor. move the cursor over a trail and a pop-up
box appears. Press
WPT and the Edit Trail menu opens.