Filter
Top Products
Installation & User Manual
Ed 19UK June 2013
Page 10 of 28
Brackets for Internal Mounting - drawing no. G022P010:
Bulkhead
Tank bottom
TWO WIRE TRANSMITTER
2600 SERIES
90-C.95948
T5
Cint = 10 nF
C
CERTIFICATE REF.:
4-20 mA
Lint = 20 uH
x
i
EE
X
a
MARINE AUTOMATION DENMARK
S/N:
Umax = 33 V
T
amb.: -40 to +85 °C
I 45 mA
K
=
<
2600
Tank top
125.0
160.0
38.0
55.0
40.0
45.0
The brackets are U-shaped and manufactured of 2 mm SS 316L plated steel. Diameter of
mounting holes: 11.5 mm.
The transducer is secured by means of a spring fitted into two holes in the “U” shape, and can be
mounted/dismounted without the use of tools.
When installing in hazardous areas the cable must be protected by a steel pipe welded to the tank.
Pole Mounting - drawing no. G022P011:
TWO WIRE TRANSMITTER
2600 SERIES
90-C.95948
T5
Cint = 10 nF
C
CERTIFICATE REF.:
4-20 mA
Lint = 20 uH
x
i
EE
X
a
MARINE AUTO MATION DENMARK
S/N:
Umax = 33 V
T
amb.: -40 to +85 °C
I 45 mA
K=
<
2600
Bulkhead
Tank top
Tank bottom
34.0
26.0
40.0
24.0
41.0
26.0
1" Thread
The weldable collar and the nut are manufactured of SS 316L steel. The gaskets are made of
nitrile rubber.
Note: Max torque 20 Nm (slightly tighten by the hand + 1/8-1/4 turn). Remember the gasket.