Filter
Top Products
Installation & User Manual
Ed 19UK June 2013
Page 14 of 28
Amplifier Box MAS2600-XXX-XX-X/XX
The MAS2600 amplifier box is manufactured in polyester, which has the strength and stability of
aluminium, insulation and resistance properties of plastics. Colour code RAL 7000.
The amplifier box is protected to the level of IP 56 and must be mounted outside the tank, e.g. in
the engine room or other dry areas.
The amplifier box is available with a PG9 hole for silicone gel filling to protect the amplifier
from moisture.
When the amplifier box is mounted on open deck with the risk of being drenched it is
recommended to mount the amplifier box inside the deck box 165B9035. To further reduce the
exposure of water place the amplifier box to the centre of the vessel.
0: Without amplifier box.
1: Standard box with PG 11/PG 11 cable glands. For cable diameter 5 -10 mm.
2: Standard box with PG 11/PG 13.5 cable glands. For cable diameter 6-12 mm.
3: Standard box with PG 11/PG 16 cable glands. For cable diameter 10-14 mm.
5: Standard box with PG 13.5/PG 13.5 cable glands. For cable diameter 6-12 mm.
6: Standard box with PG 11/PG 11 cable glands and filling hole. For cable diameter 5 -10 mm.
7: Standard box with PG 11/PG 13.5 cable glands and filling hole. For cable diameter 6-12 mm.
8: Standard box with PG 11/PG 16 cable glands and filling hole. For cable diameter 10-14 mm.
MARINE AUTOMATION DENMARK
Cint = 10 nF
2600 SERIES
4-20 mA
CERTIFICATE REF.:
Lint = 20 uH
x
EE
X
i
a
C
amb.: -40 to +85 °C
I 45 mA
S/N:
Umax = 33 V
T5
90-C.95948
2600
T
K=
<
TWO WIRE TRANSMITTER
55.0
110.0
75.0
45.0
98.0
PG11
cable gland
1/8" NPT
vent fitting
4 pcs. ø4.5
Use 4x20mm bolts and nuts
for suspension on a 4mm
thick surface