Filter
Top Products
Installation & User Manual
Ed 19UK June 2013
Page 16 of 28
Handling
The MAS2600 transducer is a highly sensitive electronic piece of equipment and proper handling
is most important.
To avoid damaging the transducers:
• NEVER lift by the cable if transducer is mounted with fittings.
• NEVER remove the protection cap in front of the diaphragm before installation.
• NEVER knock the transducer.
• NEVER apply pressure to the diaphragm in any way whatsoever, whether using fingers, tools
or sharp objects.
• NEVER use sharp objects when cleaning the diaphragm.
• NEVER submerge the cable so that the breather tube is under water.
• NEVER bend the cable in a radius of less than 90 mm.