Filter
Top Products
Installation & User Manual
June 2013 Ed 19UK
Page 15 of 28
Amplifier PCB MAS2600-XXX-XX-X/XX
The PCB is available in different types for the different transducers, with or without terminals for
Pt100 temperature sensor.
0: Without amplifier PCB.
P or S: Programmable output range. The amplifier can be calibrated to 4-20 mA output in
whatever range wanted within the transducer range. Calibration is made by means of dip
switches and potentiometers.
D or M: Differential output range. The output can be adjusted to 12 mA output with no pressure
applied. With pressure or vacuum, the output goes against 20 mA and 4 mA
respectively. Full-scale and zero point calibration by means of software, e.g. tank
monitoring software.
• The types S and M are with terminals for temperature sensors.
• The types P and D are without terminals for temperature sensors.
Deck Box 165B9035
Programmable Range (Type P and S)